A convenient item that has been renewed to make it even easier to use, and that compactly stores the tamo net.

• When starting out, you can immediately deploy the tamo net just by starting out.
• Because of the simple lock structure, flapping of the tamo net can be prevented.
• When folded, the lock can be released by turning the FL fin
• Can be attached to commercially available products with the same specifications (W1/2 threads 12) as screws for commercially available landing nets.
• Equipped with an O-ring to prevent the mesh from fluttering

■ FL fins (folding fins)

You can unlock by turning the FL fins.

■ With an O-ring to prevent the net from fluttering

By attaching an O-ring in addition to the semi-lock type, the fluttering of the net during Run&Gun can be further suppressed.

① Turn A (frame fixing nut) in the direction of the arrow and lower it.

② Attach the FL Joint II to the frame by turning it clockwise and tighten it to the end.

③ Loosen the FL joint II from the position of ② by turning it counterclockwise.

④ In that state, temporarily tighten A to the frame side by turning it clockwise.

⑤ While pressing A, turn the frame counterclockwise to tighten.

⑥ Repeat ③④⑤ until FL Joint II is vertical to the frame.